Right Turnout 15` 112,6mm

Trix N Veksel høyre 15'

Minitrix 15° Turnouts with a Polarized Frog. Straight side of the turnout |< 112.6 mm / 4-7/16" >|. Branch radius = R 4 - 15° + 1 x 14903. Optional Stop Turnout function included. An electric turnout mechanism can be installed on these turnouts.

The frog for these turnouts is made of metal and is continuously supplied with power by means of a built-in switch, i.e. continuous current supply that is automatically switched over each time the turnout setting is changed.

Minitrix Track is the ideal track for fast setup of a track pattern on a table or on the floor. With six sizes of curves, flex track, standard or wide radius turnouts and standard or wide-angle crossings the Minitrix track system offers ideal conditions. The most important is careful installation of the track. Small unevenness, wood chips remaining under the track or deburred drill holes have relatively greater effect in 1? Scale than in larger scales. For trouble-free operation, we recommend mounting an N layout on a permanent sub-base using plywood or open framework construction. Minitrix track has solid rails made of a special rust-free alloy. Together with the prototypical profile cross section this guarantees unsurpassed contact reliability between wheel and rail. There are also different track extension sets, item numbers 14311 and 14312, for easy expansion of your layout. This allows you to set up parallel loops, passing sidings, and storage tracks.

Highlights

• Prototypical appearance
• Electrical operating reliability
• Fast setup and takedown

Product info: The frog for these turnouts is made of metal and is continuously supplied with power by means of a built-in switch, i.e. continuous current supply that is automatically switched over each time the turnout setting is changed.